How to install TWRP on Samsung Galaxy S7 and S7 Edge with Android 6.0.1 (Exynos)

  • Compatibility is limited to Exynos variants; Snapdragon processors keep the bootloader locked.
  • Key requirements: drivers, USB debugging and, if available, allow OEM unlocking.
  • To avoid problems with encrypted /data, use microSD and/or flash no-verity-opt-encrypt.
  • Installing TWRP or rooting activates KNOX 0x1 and can disable services like Samsung Pay.
Iván MartínUpdated on

5 minutes

How to install TWRP on Samsung Galaxy S7 with Android 6.0.1

If you want to install a recovery on your Samsung Galaxy S7 or Galaxy S7 Edge, one of the best you can find in the present it's TWRP. Its wide options and ease of use make it one of the most recommended choices to customize some of the Korean company's devices that we have indicated. We'll tell you how to proceed with the installation if you have Android 6.0.1.

Many are already the models that offer a simple manipulation of the recovery itself that include by default, and the clearest example is the Asian company itself that has manufactured the Samsung Galaxy S7 in any of its variants. But, when using TWRP You gain advanced options such as the ability to make backups, change the kernel, or proceed with the installation of a ROM without excessive complications. It also allows flashing ZIP packages like SuperSU or disabling forced encryption.This is crucial in these models if you want TWRP to access the data partition.

Samsung Galaxy S7 and Galaxy S7 Edge

Previous steps with the Samsung Galaxy S7

TWRP for Samsung Galaxy S7 and S7 Edge Exynos

Next we are going to indicate the steps to perform to install the recovery that we have indicated in a fairly simple and, especially, safe way, in the Samsung Galaxy S7 and Galaxy S7 Edge that have an operating system Android 6.0.1 (and furthermore, compatibility is specific to models with an Exynos processor). Snapdragon models have a locked bootloader and do not allow TWRP installationThe list of specific models with which the steps can be followed is as follows:

  1. SM-G930F
  2. SM-G930FD
  3. SM-G930X
  4. SM-G930W8
  5. SM-G935F
  6. SM-G935FD
  7. SM-G935X
  8. SM-G935W8

Recommended requirements before startingCharge your phone to at least 50% (100% is better); install the Samsung USB Drivers on the PC; active Developer Options tapping repeatedly on Build Number and, within that, enable USB debugging and, if it appears, Allow OEM UnlockTo minimize problems with encryption, transfer to the external microSD card the ZIP files you are going to flash (for example, SuperSU and no-verity-opt-encrypt).

Next, the tools that are necessary to proceed with the installation, which are none other than Odin, in order to perform the corresponding installation (link), and here you can get the version of TWRP that is compatible with the Samsung Galaxy S7 and in this other link the specific one for the Galaxy Edge S7. Always download the latest version available for your variant..

TWRP 3.0 keyboard

Step to give

This is what you have to do so that everything is on the right track and, yes, we recommend carrying out a Backup of the Samsung Galaxy S7 data to prevent potential losses. Furthermore, and as we always point out, proceeding with the process is the user's own responsibility.:

  • Run Odin (you have to unzip the file you downloaded with this tool). Install the drivers and use a direct USB port from the PC to avoid communication failures.

  • Click on the AP button and select the file you obtained with TWRP. Uncheck Auto Reboot in Odin to be able to boot directly into recovery when finished and prevent the system from restoring the factory recovery.

  • Turn off the Samsung Galaxy S7 and restart it in Download Mode by pressing the buttons simultaneously. Power + Volume Down + Home, releasing them once you see the warning on screen and confirming with Volume Up.

  • Press the Volume Up button and connect the Samsung Galaxy S7 to the computer using a USB port. In Odin, the ID:COM should appear in blue and the message "Added" should appear..

  • Now, when Odin recognizes the device, press Start and the process will begin. When it finishes and you see PASS, It will immediately boot into recovery mode with Volume Up + Home + Power to enter TWRP.

  • In TWRP, you accept allowing modifications.If you cannot mount /data due to encryption, go to Wipe > Format Data and type yes, or install the ZIP file. no-verity-opt-encrypt that you copied to the microSD.

  • For deeper cleaning you can go to Wipe > Advanced and select Dalvik/ART Cache, Data and Cache (no System), and then flash the ZIP file from Install no-verity-opt-encrypt.

  • If you also want root access On Android 6.0.1, install the package SuperSU From Install and reboot into System. Alternatively, you can opt for solutions like Magisk if you prefer a root with module management.

Galaxy S7

Notes and troubleshootingIf Odin doesn't detect the phone, reinstall the drivers, try a different cable or USB port. For errors like Complete(Write) operation failed If the blue ID:COM box doesn't appear, try another PC. If TWRP doesn't recognize the internal storage, it's encrypted: use a microSD card, MTP, or disable encryption as described. Keep in mind that The stock recovery does not allow Nandroid backupsThat's why TWRP is key. Some OTG accessories may not work within TWRP depending on the version.

From this moment you can already enjoy TWRP on your model Samsung Galaxy S7 and use all the options that this recovery offers. To access it at any timeTurn off your phone and use the combination Volume up + Home + Power until you see the logo. Remember that Installing TWRP or rooting activates the KNOX counter (0x1)This can disable services like Samsung Pay; currently, there is no reliable way to prevent this on these models. This procedure is intended to exclusively to Exynos variantsSnapdragon models do not allow unlocking the bootloader and do not support TWRP.