The Android Marshmallow update for the tablet was announced. Samsung Galaxy Tab S2 8.0Well, the firmware for the UK is available and can therefore be used to proceed with the manual installation of the ROM using the tool OdinWe'll tell you how to do it in detail, what you need before you start, and alternatives for other models or methods.
Although the firmware we're discussing isn't the one used in Spain, there's nothing to worry about, since the setup process once the ROM is installed allows you to select the Spanish And therefore, the use is the usual one. Obviously, the customization TouchWiz It is present and the Android version included is the 6.0.1, so the Samsung Galaxy Tab S2 8.0 on the Galaxy S6, for example. Marshmallow brings improvements such as Pickups For energy savings, the new permit management, compatibility with Google Now and support for multi-user.
The firmware that is installed is the T710XXU2CPD9 And it's very important to note that this is compatible with the WiFi only version (SM-T710)Therefore, if you have a model with data connectivity, you shouldn't proceed with the ROM installation. The update does bring the new permissions management, includes Google Now, and, of course, the option to use multiple user accounts.
Installation Process
Here are the steps to be taken to install Android 6.0.1 on the Samsung Galaxy Tab S2 8.0. The firmware is downloaded at this link and the Odin program in this other. By the way, all the content of the tablet is erased, so it is essential to make a Backup And, as we always point out, the responsibility for doing what we tell you lies with the user.
-
Unzip the file ZIP which contains the new Android 6.0.1 version for the Samsung Galaxy Tab S2 8.0
-
Run the app Odin on the computer to continue with the installation
-
Restart the Samsung Galaxy Tab S2 8.0 in Download modeTo do this, you have to turn it on by simultaneously pressing the Home + Power + Volume Down hardware buttons.
-
Connect the tablet to the computer using the USB cable original
-
Add the firmware with the new Android version to the Odin section called AP/PDA
-
Make sure the Re-partition option DO NOT is selected
-
Push the button Start and be patient. When everything is over, the Samsung Galaxy Tab S2 8.0 will restart and you can use Android 6.0.1 without problems
Prerequisites and recommendations
– Install the samsung usb drivers (Samsung Kies or Smart Switch help with drivers and backups.) – Battery above the 60% To avoid cuts. – Use rear USB ports from the PC and the original cable. – In Odin, only leave them enabled. Auto Reboot y F. Reset TimeDo not mark repartitioned. – If the message appears ADDEDThe device has been detected; you will see at the end PASS in green.
What if your Galaxy Tab S2 is a different model?
This package is exclusive to SM-T710 (WiFi)If you have a model with data (SM-T715/SM-T719) or the 9,7-inch version (SM-T813 WiFi / SM-T815/SM-T819 LTEDownload the firmware for your exact model and region from trusted repositories. Flashing the wrong firmware may cause problems. network failuresbootloops or loss of IMEI. Always check the build number and the CSC before using Odin.
Optional root in Marshmallow (for those who need it)
If you also want rThere are compatible packages for several Tab S2 models: SM-T710, SM-T715, SM-T713, SM-T719, SM-T813, SM-T815 y SM-T819The typical process uses Odin Loading a file . Tar.md5 in the AP field, checking that only those that are activated are activated Auto Reboot y F. Reset TimeWhen you finish you will see PASS and the device will reboot with root access. Note that the Rooting may void the warranty.To return to the original state, simply flash the stock firmware with Odin following the same steps.
OTA update without Odin
If you prefer to update without a PC, you can try this method OTA: Go to Settings > Software update > Download and installActivate automatic downloads by Wi ‑ Fi to receive new versions and, when one becomes available, press Install Now Or schedule the installation for later. Depending on the size of the update, the download may take some time; make sure you have enough battery power.
Troubleshooting common problems
- TWRP pre-installedEven if you have TWRP, you can still access Download Mode Press Home + Volume Down + Power, then confirm with Volume Up. Odin does not detect the deviceReinstall drivers, change USB port/cable, and avoid hubs. Odin failure or shutdownUse a stable version of Odin and repeat the AP file upload. Bootloop after flashing: enter recovery mode and erase cache/data (This deletes the content), or reflashes the firmware. Incorrect firmwareDon't insist; download the correct package for your exact model.
Others Tutorials you can find them in this section from Android Help, where there are options of all kinds and not only for the Samsung Galaxy Tab S2 8.0 tablet.
You have a complete guide for installing Android 6.0.1 at the Galaxy Tab S2 8.0 With Odin, discover alternatives OTA, resolve common issues, assess the root And above all, minimize risks with good prior practices such as backups, drivers, and compatibility verification.
