Little by little the Android KitKat version different Samsung devices that it was announced that they would get it. An example is the Samsung Galaxy Note 10.1 2014 Edition, that today it has been known that this tablet begins to receive the specific firmware with 4.4.2.
Specifically, we are talking about the model SM-P605, which is the one corresponding to the variant with LTE (4G) connectivity. Therefore, users who have this device, with a screen with a resolution of 2.560 x 1.600, should be attentive to the messages they receive, since in a short time they will have the expected warning that will bring their operating system to the Android KitKat version. .
The new software version for the Samsung Galaxy Note 10.1 2014 Edition is the P605XXUCNE2 And, for the moment, the first regions in which it is being received are those of Northern Europe, such as countries such as Denmark or Finland. And, of course, with the update the usual improvements of this version of Google's work are achieved, such as better performance, wireless printing support, less battery consumption and, of course, greater stability.
The specific data of the new version of the firmware, which will gradually be deployed in the different regions, are the following:
- Model: GALAXY Note 10.1 2014 Edition LTE
- Country: Nordic
- Version: Android 4.4.2
- changelist: 1614486
- Date: Monday, 12 May 2014 10:43:53 +0000
- PDA: P605XXUCNE2
- CSC: P605OXACNE2
- MODEM: P605XXUCNE2
Download and install the new firmware
If you do not want to wait for the update to arrive via OTA or by Kies, it is possible to get this one we are talking about and install it on a Samsung Galaxy Note 10.1 2014 Edition (LTE), which can always serve as a test to know what is included in the update. First of all, and as we always say, it is advisable to make a backup copy of the data you have and keep in mind that the process is sole responsibility of the user.
Next, we give the steps to follow to install the firmware that can be downloaded at this link. In addition, you also have to get the Odin program that can be downloaded at this other address. Once both files are obtained, the following must be done:
- Start Odin and, without connecting to the computer, restart the Samsung Galaxy Note 10.1 in Download mode (press Volume Down + Power + Home Button at the same time).
- When you see the warning screen with the Android logo, connect the device to the computer using a USB cable. By doing this the field ID: COM it should turn blue indicating the detected port.
- Then press the button labeled AP and find the tar.md5 file in the folder where you unzipped the firmware.
- Once this is done, make sure that the Re-Partition section is deselected and press the button Start (the process will begin, and you should not disconnect the tablet at any time).
- When the message appears Pass! and the upper box turns green, the process is finished. Now, you can restart the terminal with the new operating system. Little by little the different Samsung devices that were announced that they would get it are updated to the Android KitKat version. An example is the Samsung Galaxy Note 10.1 2014 Edition, since today it has been known that this tablet begins to receive the corresponding firmware with 4.4.2.
Source: SamMobile
